Carl Martin Single Channel PlexiTone

The ' single channel' Carl Martin PlexiTone was designed in collaboration with Pete Thorn and is housed in a small pedal-friendly housing with 3 buttons and 1 switch. Aside from Pete's minor tweaks that give this new pedal a tighter bottom end and slightly softer high frequencies, it's exactly the same gain structure as the High Gain setting on the original Pro-Series PlexiTone... it just plays better with different amps.

The single Plexi also includes our new DC-DC converter circuitry, so the pedal can be powered by a regulated 9V supply, but will still operate at the same +-12V level as the original AC powered PlexiTone. This allows us to use the same high-quality components that provide the same tone and headroom that sets the CM Pro-Series apart from the rest!

Our Bypass switch button; that turns the PlexiTone on or off is an active buffered output so you don't lose any signal in long cables across a stage!

energy needs

• Battery: The PlexiTone does not accept battery use, only external power.
• Power consumption: max. 62mA
• Power supply: 9 V DC (regulated), 100 mA minimum, 2.1 mm female plug, center negative (-) NOTE: Use only DC power! Failure to do so may damage the device and void the warranty.

Specifications

• Input..........................................1M Ohm
• Output power................................... 200 Ohms
• S/N ratio.......................................... 54 dB
• Dimensions ................................ 112 (W) x 72 (D) x 57 (H) mm 4.40” (W ) x 2.83” (D) x 2.24” (H) Weight................................. ............ .....280g/0.62lbs